Thermoplastic Road Marking Vehicle

• Customization: Available
• Material: Stainless Steel
• Application: Road
• Model NO.: RP-T-10
• Die Wide: 10 15 20 30cm
• Transport Package: Each Set in a Case
• Specification: paint capability: 750kgs
• Trademark: 6r
• Origin: China
• HS Code: 3919909000
• Production Capacity: 6sets/Week

Product Description

THERMOPLASTIC ROAD MARKING VEHICLE

1. Engine: Japanese Honda 20HP air-cooled electrical starting single-cylinder gasoline engine. The fuel tank's Capacity is 40L.
2. Driving system: Imported oil pressurized continuously variable speed transmission system (HTS) with automatic brake device that can freely go ahead, back off and stop. The left and right back wheels are equipped with differential speed gearing to ensure it to drive freely around the curve and change directions timely. Driving speed: 0-22km/h, maximum climbing capacity: 15. 
3. Heating mode: Propane infrared heating source, saving the gas 30% than the traditional heating way. The heating is more evener, more convenient, safer and more environment-friendly.
4. Marking mode: Equipped with hydraulic screeding marking shoe; structure board is made of imported special steel sheet with high-temperature resistance (2000°C), oxidation resistance and deformation resistance. It has much better stability after stamping. The plinth is the pneumatic screeding structure that is made of special alloy steel. Floor knife that contacts with the ground directly adopts imported hard tungsten steel knife-head. The precision technique ensures its better sensibility, abrasion proof and firmness. The marking has more regular raised shape, evener and straight bottom line edge, and perfect head. The standard configuration of the marking shoe is 150mm. (Option for other sizes according to the needs of customers 10 20 25 30cm).
Die type 1: 1-3mm; type 2: 1-2.5mm; rib-line dies: 3-7mm. Can mark rib line and flat line equipped according dies.
5. Glass bead spraying system: 55L single pressure type glass bead tanks with visible window. Equipped with single glass beads spraying gun on the left or right side, whose pressure, flow and spraying width can be adjusted to ensure spraying glass beads much firmer, much evener and more economical.
6. Electronic control: Set up various standard linetype control mode to realize micro-electronic intelligent control; it can be freely adjusted according to the customer's personalized needs.
7. Paint tank: Cool-rolled oxidation-resisting steel paint tank, in whose interlayer the high-tech thermal insulation material is filled. Inside the tank is equipped with the hydraulic chain-driven horizontal vane blender. Paint Capacity:150L/750kgs.
8. Air compressor: 0.6 m3/min piston type air compressor. Air storage tank with adjustable pressure is equipped with automatic safety exhaust device.
9. Warning function: Single warning lamp whose flicker frequency (or burst flash) can be adjusted freely, it improves the safety of marking operation.
10. Guide rod: Guide rod can be freely adjusted up, down, left and right.
11. Pre-mark system: It can be fitted with pre-marking system. When you marking the one line you can pre-mark another line, this improves the working efficiency greatly.
12. Size & Weight: 3350*1450*2370mm/950kgs N. weight

Tech info of Pushed Thermoplastic Road marking machine:   
Thermoplastic Road Paint Machine

1. content of barrel for paint: 100kg
2. content of barrel for micro glass beads: 10kg
3. pyrogenation system: liquid petroleum gas (LPG)
4. liner wideth: 10cm 15cm 20cm or 30cm; 40 45cm ( to equipped a liner whose wide is 40 or 45cm, RP-T-01 can mark the pedestrian cross line)
5. dimension: 110*90*95cm/wood bracket packing
6. Gross weight: 225kg; total CBM: 1
7. 1280USD/SET for line marking machine with one die 10 or 15cm.

Booster can be equiped to push the thermoplastic road marking machine


Packings:
one set in a case

name	size	weight	case
thermo machine	1100*1000*800mm	220kgs	polywood case